Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3EG3 - PA66-GF15 - BASF

Material Data Center offers the following functions for Ultramid® A3EG3:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 70 / * cm³/10min ISO 1133
온도 275 / * °C -
하중 5 / * kg -
ASTM 데이터
성형 수축률, 평행 0.0055 mm/mm ASTM D 955
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 6000 / 4500 MPa ISO 527
항복강도 130 / 85 MPa ISO 527
파단시 평균신율 3 / 10 % ISO 527
굴곡 계수, 23°C 5500 / 4000 MPa ISO 178
탄성변형률, 1000h * / 2500 MPa ISO 899-1
챠피 충격 강도, +23°C 45 / 70 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 43 / - kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 8 / 11 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 7 / - kJ/m² ISO 179/1eA
아이조드 충격은 노치, +23°C 5.5 / 6.5 kJ/m² ISO 180/1A
Ball indentation hardness 200 / 150 MPa ISO 2039-1
ASTM 데이터
파단시 강도 114 / - MPa ASTM D 638
파단시 신율 3 / - % ASTM D 638
굴곡 계수 5170 / - MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 59 / - J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 53 / - J/m ASTM D 256
온도 -40 °C -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 260 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 250 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 250 / * °C ISO 75-1/-2
선형 열팽창 계수, 평행 32 / * E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 75 / * E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 HB / * class IEC 60695-11-10
테스트 두께 1.6 / * mm -
ASTM 데이터
DTUL @ 66 psi 250 °C ASTM D 648
DTUL @ 264 psi 250 °C ASTM D 648
녹는점 260 °C ASTM D 3418
전기적 특성건조/응축단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 3.5 / 5.5 - IEC 62631-2-1
소산 인자, 1MHz 140 / 1600 E-4 IEC 62631-2-1
부피 저항 1E13 / 1E10 Ohm*m IEC 62631-3-1
표면 저항 * / 1E10 Ohm IEC 62631-3-2
CTI 550 / - - IEC 60112
ASTM 데이터
부피 저항 1E13 / - Ohm*cm ASTM D 257
기타 특성건조/응축단위시험규격
물에서의 흡수성 7 / * % ISO 62와 유사
조건에서의 흡습성 2.2 / * % ISO 62와 유사
밀도 1230 / - kg/m³ ISO 1183
물에서의 흡수성, 평형 7 % ASTM D 570
밀도 1240 kg/m³ ASTM D 792
물질의 비성질건조/응축단위시험규격
ISO 데이터
점도수 145 / * cm³/g ISO 307, 1157, 1628
특징
생산 공정
사출 성형, 기타 압출
인도 유형
펠렛 (입자,알갱이), 자연 색상
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.